BlueWell
Store rainwater in the deep subsoil for later use.
Deep infiltration is a proven technology that uses the deeper aquifer sand layers for infiltration, storage and recovery of stormwater via wells.
Deploy the natural underground to store & abstract high quality water for reuse.
The BlueWell consists of vertical pipes that transport the treated water to the subsoil for storage and treatment, and allow the abstraction of the infiltrated water.
The pipe is installed vertically in the ground and surrounded with coarse material.
The water infiltrates through the slots at the bottom of the pipe into the sand layers, adding an extra treatment step & creating a natural water bubble.
Depending on the location characteristics, both infiltration & extraction wells can be located in the same borehole or separate from each other.
-
Features
✓ Vertical installation that takes up little space
✓ Low-maintenance due to removal of suspended particles
✓ Prevents clogging of the infiltration well
-
Design
✓ 2 vertical pipes to infiltrate & extract treated water
✓ To be placed underground
✓ Pipes are housed in a 1x1x1 m sump
-
We work together with sub-soil specialists to deliver durable installations.
BlueBiofilter is designed to prevent clogging of the infiltration well
Infiltration wells provide safe, continuous and low cost discharge of large volumes of stormwater.
Infiltration wells require regular maintenance. There is fine material in rainwater and surface runoff. This material can collect at the well screens which can prevent water from infiltrating. BlueBiofilter is designed to remove suspended particles and prevent clogging of the infiltration well.
It all starts with a conversation
Get a circular water system for your project in 3 simple steps.
1.
Let’s chat. Schedule a discovery meeting.
We always start with a chat. Have a location in mind? Let us know and we will discuss your project site, your water needs and quality requirements. No strings attached.
2.
Get an overview of the possibilities.
With the information you provide us, we will make a Quick Scan to explore the rainwater reuse opportunities your site has to offer. We conduct a preliminary site analysis to understand the project area, the source of the water, the intended application, and other relevant factors.
3.
Choose your solution.
Once we outline the technical possibilities, we will advise you on the best solution to fit your project site, water needs and budget. You will decide the next step by choosing the service package that is right for you to start in, depending on the phase of your project or contracting conditions.